1、Effect of alendronate on osteoclastogenesis induced by wear debris

2、Further abrasive wear may occur as a secondary phenomenon due to the plowing action of the adhesive wear debris.

3、However, the clearance for transfer film and the remainder of loose wear debris shou...

4、The high temperature wearing was due to the fatigue delamination of the oxide, the lump wear debris were revealed on the precision cast steel, and the bar wear debris on H13 steel.

5、However, the clearance for transfer film and the remainder of loose wear debris should be considered I...

6、Wear test method using ferrography gives not only high precision, but also a conventional collection of wear debris, which are useful for further stud...

7、In total joint replacement, key point of prophylaxis for aseptic loosening was prophylaxis for periprosthetic osteolysis which was due to particulate wear debris.

8、As in arthroplasty of the appendicular skeleton, there exists concern over wear debris leading to osteolysis and the systemic effects of free metallic ion production.

9、Results: in the dense fibrous connective tissues, there are infiltration of macrophages and foreign-body giant cells with plenty of wear debris.

10、You do not need a sophisticated grasp of mechanical engineering, left alone of "wear debris particle analysis", to spot something odd about the following sentences taken from two different learned works on the subject:

11、The worn layer of Al-Si alloy where only wear debris are going to delaminate is composed of composite layer, deformed layer and undeformed parent material from the surface to the inside.