1、Convection can be of two types: natural convection and forced convection.

2、Convection without phase change can be divided into free convection and forced convection.

3、Natural convection can affect the heat transfer coefficient in the presence of weak forced convection

4、The forced air convection oven heats food and beverages by conduction with a hot plate or by forced convection.

5、Two phase forced convection heat transfer coefficients are correlated as function of Lockhart Martinelli parameter.

6、The model assumes that forced convection and nucleate boiling coexist in the annular flow regime.

7、Two phase flow forced convection boiling heat transfer on helical coiled tubes has been systematically studied.

8、At first, the physical mechanism was studied then the 2d compact numerical simulation model for natural convection and forced convection heat transfer analysis was built respectively.

9、An experimental study on forced convection heat transfer of single-phase water in vertical and horizontal narrow annuli was performed.

10、The heat transfer of film boiling on an elliptical cylinder when forced convection coexists with volumetric force is investigated.

11、Three-dimensional physical and mathematical models for the coupled heat transfer of natural convection in a liquid pool with heat source and forced convection in cooling coil tube are established.

12、In the chapter 4, the mainly aims at the study of thermal characteristic of heat sink with heat pipe under natural and forced convection.

13、This software can be used for package -, board - or system-level CFD simulation, including natural and forced convection and radiation heat transfer.

14、Therefore , the rule of the influence of the specialty of different anticorrosion surfaces on the flue gas forced convection heat transfer with condensation was obtained.

15、The FDS software package was used as the numerical framework for the DES solver, which was then used to simulate a typical forced convection problem.

16、Method and formulae for calculating the mean forced convection heat-transfer coefficient of the blade surface, as well as for the blade passage's bottom wall, are introduced.

17、In this paper, the three-dimensional numerical model of the forced convection closed loop solar water heating system was established, and then analyzed the simulation date using the CFD.

18、Unstable concentration field in the condition of unforced convection in the confined vacuum has been calculated by programming flow field and concentration field simultaneously.