1、lint filter screen, lint screen
2、Clean the filter screen and press it back.
3、A filter screen is arranged in the water collector joint, and a heat collector is arranged on the joint of the lower side of the filter screen.
4、Sometimes, indoor lighting is too bright, could be considered in place before the micro-filter screen.
5、Drying section:the blower equipped with muffle cotton and air feeding filter screen pack for less noise and better drying conditions.
6、The intermediate demister shapes air flow swirl generated by impeller rotation to get bigger particle and improve the arresting efficiency of the next filter screen.
7、The rotating brush moving simultaneously with the dust absorption pore is also provided to remove dust on the indoor set filter screen.
8、It is used for crushing waste thread. waste file and off cut for re-utilization. The diameter of crushed material can be adjusted by replacing filter screen according to your different requirements.
9、Make sure the pressure in the tank of the sand separator was released to zero, then open the top cap on the upper end of the tank to replace the filter screen.
