1、Equipment leadscrew cover and worktable.
2、The experiments have been done on granite worktable.
3、They are all used in worktable of small sculptor.
4、Vacuum worktable can be fine adjusted for location.
5、Worktable adjustment: the worktable of the vertical external packing machine can be regulated according to packing bag height.
6、This offers a testing theory and method to the adjustment of the large turning worktable.
7、Fixed worktable can carry large work piece and keep high precision with moving electrode.
8、This paper introduces a XY worktable in order to enlarge the workspace of polishing system.
9、Static and dynamic analyses were made for the virtual-axial worktable.
10、The orientation system for microscope worktable based on AT89C52 chip microcomputer is designed.
11、The processing equipment consists of the worktable and spindle as well as the motors and controls needed to drive them.
12、Travel instructions pertain to the type of interpolation and slow or rapid movements of the tool or worktable.
13、The communication between the worktable controlling process and the deformation measurement process is fulfilled by message transmission mechanism.
14、The motion equation of the worktable of the NC ellipse rolling is established , so no-rib rolling is realized.
15、The fundamental equipment of each eye bank included super-clean worktable, slit-lamp microscope, refrigerator, and liquid nitrogen jar.
16、The system of VPI equipment mainly includes vacuum chamber, heating unit, worktable with its drive unit, vacuum pumping unit, gas-charge unit and control unit, etc.
17、To stretch our analogy a bit, imagine that the water is spilling on a worktable with lots of exposed electrical wiring.
18、All of the supports and shafts on the machine worktable that may come into contact with the product are made of AISI 304 stainless steel only.
19、The micro-motion worktable is the important part in micro-mechanical systems and the key component to achieve high-precision positioning.
20、It is very important to the study of CNC system oft he position of work-piece machined on the worktable of the CNC machine tools.
21、Before machining, the tool detection should be fixed on the smooth surface of the machine's worktable, and enter the manual mode of CNC, make the cutter be closed to the tool detection.
22、The pleasantest room in the house was set apart for Beth, and in it was gathered everything that she most loved, flowers, pictures, her piano, the little worktable, and the beloved pussies.
23、In planing, the workpiece is attached to a worktable that reciprocates past the cutting tool. The cutting tool is automatically fed into the workpiece a small amount on each stroke.
24、The dentist did not return the smile. He brought the basin of sterilized instruments to the worktable and took them out of the water with a pair of cold tweezers, still without hurrying.
