1、determination of interfacial tension-drop volume method

2、The relationship between interfacial mass transfer coefficient and interfacial ki-netic energy is established.

3、The interfacial diffusion of alloying element is important to microstructure, microhardness and interfacial bonding strength.

4、Cohesive zone modelling of interfacial delamination in PZT thin films

5、The interfacial functionary mechanism of the composite materials was studied.

6、Surface active agents-Determination of interfacial tension-Drop volume method

7、Analyse of the interfacial reaction in WC_p/2024Al composites

8、The interfacial viscosity of super critical separated Iranian light vacuum residue fractions was investigated by using shear interfacial viscosity meter.

9、Preparation of olive oil-polyurethane microcapsules by interfacial polymerization

10、The dynamic interfacial shear viscosity of NP-4, sodium oleate and montmorillonite was measured using SVR·S interfacial rheometer.

11、The interfacial diffusion of alloying element is an important factor to microstructure, apparent hardness and interfacial bond strength.

12、Packings are passive devices that are designed to increase the interfacial area for vapour-liquid contact.

13、A kind of porous polyamide carriers to immobilize anaerobic microorganisms was prepared by interfacial polymerization method.

14、Advances in coagulation interfacial process: role of particle/AOM-IPF-aqueous solution interactions

15、Effect of hydroxyl polar groups on the surface and the interfacial adhesion properties of PBO fiber

16、The interfacial tension will decrease to ultralow value for the formation water with given salinity.

17、With the increase of solid particle content, the time of phase disengagement will be prolonged and the interfacial emulsion intensified.

18、Influences of different oxidants on the structure and properties of Poly(o-toluidine)synthesized by interfacial polymerization

19、These results proved that there were some interrelation between the rules of interfacial polymerization and the performance of membranes.

20、The interfacial tension of the alkali ASP system descended with the alkali and surfactant density increasing, and decreased with time.

21、Surfactant can lower interfacial tension between oil and water and alter rocky wettability, so it will be used extensively.

22、All the results indicate that interfacial polymerization between isocyanate and amine to form polyurea wall material is a quick, effective way for capsulation of wax.

23、Using UV photo-grafting treatment of PET non-woven fabric to increase the property of the interfacial connection of non-woven fabric and basal body.

24、In designing DC XLPE joints, the suppression of interfacial space charge is the most important, which depends on the reasonable permittivity and conductivity coordination of the two insulations.

25、As a result, analysis and discussion show that the influence of interfacial crack or rigid line inclusion on the interaction between screw dislocation and inhomogeneity is significant.

26、The solderability of electronic solders depends to a great extent on the wettability, which relates to solid, liquid and gas interfacial tensions of the melted solders on substrates.

27、A calculation model for the interfacial shear stress of the reinforced concrete beam strengthened with prestressed CFRP sheets was built based on the elasticity theory after releasing and loading.

28、The formation of self-assembled interfacial n-dodecanethiol monolayer and its effect on the corrosion protection of epoxy coating were evaluated using the X-ray photoelectronic spectroscopy, electrochemical impedance spectroscopy, impedance-time transition, and phase angle-time transition method.

29、This can be explained that for lower water flow rates, the decrease of the interfacial area concentration was caused by the sharp decrease of the oil phase fraction with increasing water flow rates.

30、The effect of the experimental parameters on the interfacial bonding strength was investigated, as well as the influences of the anodic oxidation state on the titanium substrate surface appearance.