1、The device name is the identifier configured on the device.

2、Error found in file name or printer device name

3、Cannot read the device name from the media .INI file.

4、For convenience, we've set the device name to be vpn0.

5、"The device name is used by applications to access this device.

6、The following code example performs a device inquiry displays the device name in a user interface.

7、Unable to redirect the specified local device over the network because the local device name is invalid

8、The first character of the device name must be an alphabetic character. The device name cannot contain non-printable characters. Please retype.\0

9、"The specified command requires an alias, file, driver, or device name. Please supply one.

10、The local device name has a remembered connection to another network resource.

11、The special word '%s' cannot be used for a logical device name.

12、Because label, UUID, and friendly name will bond with a dedicated device forever, no matter what device ID it has or what device name it gets, your system will always find your root file system disk.

13、The operator can assign a physical device to a logical device name through this command, as described in the second chapter .

14、When they are accessed, the kernel maps to the appropriate device driver by devfs device name, rather than by major number.

15、Unmount any partitions on the card. Use your card's device name in place of /dev/sdg in the following example

16、Not enough storage memory to save the device name. Use the System control panel to increase storage memory.\0

17、Note that when the currently active audio output device does not support volume control (such as an A2DP device), the volume slider is replaced by the appropriate device name.

18、The mapping from special file to kernel driver is made possible by the major number, not the actual device name, which is irrelevant to a non-devfs system.

19、The next example assumes that device_namer outputs one part for the device name, followed by any number of parts which will form additional symbolic links.

20、In this case, you iterate through the contents of the recv aggregate, sum the packet lengths for each tuple (device name, PID, and process name), then emit this data.