1、BHA finite element model
2、Then the solid finite element model and the integrated finite element model of suspenders are built up.
3、Establishment of a head finite element model of craniocerebral trauma and model validation
4、In this paper, a 3-d parametric finite element model for a pressurized cylinder with a long rectangular tube joint was established using the finite element software FEPG.
5、Objective To establish a three dimensional finite element model of proximal femur of normal person as a foundation of finite element analysis in this area.
6、Reducing the order of a large structural finite element model is important in improving the efficiency of finite element analysis in the field of structural dynamics and vibration.
7、In this dissertation, nonlinear finite element model establishment method of the guyed mast is studied.
8、Theoretical and experimental study on the construction of baseline finite element model of frame structure
9、A two-dimensional axisymmetric finite element model of sampling tube and sediments is built.
10、Fixture optimization differs from structure optimization because its finite element model is difficult to parameterize.
11、The mortise and tenon joint of the structure is replaced by a special beam-element group in the finite element model.
12、A finite element model of large combined tubular reactor with complicate structure and loads was built up.
13、The eight-point finite element is used for the discretization in the space system. The finite element model is given, facilitating to sensitivity analysis for non-linear direct and inverse problems.
14、Through the comparison of modal shape of floating caliper brake system elements by finite element modal analysis and experiment modal analysis, the validity of finite element model is confirmed.
15、The basic theory of finite element modal analysis was discussed briefly in this paper, and the method how to build properly finite element model of body in white was recited.
16、In the paper, the 3-dimension finite element model for bridge deck continuous simply-supported girder is established and model analysis is carried out with ANSYS.
17、In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
18、Analysis of finite element modeling for a half-loading bus
19、Then the quantity and quality of the surface mesh is optimized so that it can be used to generate finite element model for special fields.
20、A method to simplify the composite wallboard to the equivalent is brought out for establishing the finite element model in SATWE, which is widely used in engineering design.
21、Purpose To construct a finite element model of a normal foot. With this model, the spinal change of the first ray, the relationship between the change and hallux valgus were analyzed.
22、Based on displacement-based finite element models proposed, a finite element (FE) method of steel and concrete composite beams considering slip between steel girder and concrete plate is presented.
